The last two weeks, I’ve been working on an AIR project called WCAP Pro.  It stands for Westberg Circuit Analysis Program and has been around in some form since the 80s.  It started out as an MS-DOS program written in Fortran 77 by my father.  He has a background in electrical engineering and mathematics.  There was no such thing as a computer science degree at most universities at the time, so it was a nice big bowl of spaghetti code with goto statements aplenty.  To run it, you create a specially formatted text file that describes the Resistors, Capacitors, Inductors, and Current Sources along with the connections between them.  When you run the DOS program, it spits out a text file with the results of the circuit analysis.  The DOS program still has a small but loyal community using it to this day.

Since that time, the algorithm for WCAP has been incorporated in two software applications written in Microsoft Visual C++.  Phasor Professional allows the user to design a circuit used in AM Radio that directionalizes the radio signal.  This circuit sits between the transmitter and the towers of an AM Radio station.  The second was called Diplex Professional and helped the user design a circuit that allowed two radio stations to share the same tower.  The WCAP algorithm was converted to C++ and used internally by both of these applications.

The most recent evolution for WCAP is again as a standalone application.  It has been completely rewritten using Adobe AIR 1.1 technology.  Much of the work has been focused on the user-interface for this application.  Many tools in the electrical engineering arena are heavy on algorithms and complexity.  I wanted to make this application’s UI so smart that it would be truly FUN to use.

I started with two open-source projects, Flexlib, and Degrafa.  I used the DragScrollingCanvas component from flexlib because I wanted the user to be able to pull the schematic around the screen as if they were manipulating a piece of drafting paper.  I submitted an enhancement to DragScrollingCanvas to allow me to exclude certain children from causing canvas dragging.  Doug McCune cleaned up my code and incorporated this concept into Flexlib.  Degrafa was used to draw all of my schematic components.

I also incorporated a commercial product called Nitro-LM to handle the licensing of my application.  This was kind of a no-brainer for me since I consult for Simplified Logic working on the Nitro-LM licensing product.  It will allow me to keep track of who is using the software and also have enough control to shut someone off if they don’t pay their maintenance.

Most schematic-building applications have a “snap-to-grid” feature that lines up components.  To me, this always seemed a bit abrupt from a UI standpoint.  Any component placed in my schematic slides into place using standard Flex move effects.  Another feature I disliked about other programs is how they connect components together.  You have to draw each line segment between components and if you move a component, you need to re-route.  I created a pathing algorithm that keeps the connector lines attached even if you move a component.  Also, if you drop a component so it’s touching another, they are automatically connected up.

Rotating components in standard schematic tools usually involves selecting the part and then hunting for some type of rotate toolbar button.  I provided a toolbar button to do it, but I also allow the user to hover over a component and mouse-wheel down to swing the component down, or wheel-up to rotate the component back to horizontal.

Another unique UI feature I designed for this application was an Eraser tool.  It works just like a pencil eraser and you drag it back and forth across lines and components to highlight them for deletion.  A confirmation box (dummy warning) then confirms the action.

The final UI feature I created was the Probe tool (seen in the screenshot above).  I took my voltage tester and placed it on a piece of green paper in my driveway and snapped a photo of it with my wife’s digitial camera.  The green contrasted nicely with the black and red of the voltage probes so I could make the image transparent fairly easily.  Whenever the probe tool is dragged over connecting wires or parts, the outputs from the WCAP algorithm are displayed at the center frequency for analysis.  I wanted this to have a similar familiarity to an actual engineer diagnosing a circuit in real life.  If the probe is double-clicked on a connecting wire or part, all the details about that part at ALL frequencies analyzed are displayed in a data grid.

The application is still beta quality and is lacking about 2 key features.  I hope to have everything complete before unveiling the application at the NAB AM Antenna Computer Modeling Seminar on November 20th.

This video shows some of the UI behaviors I’ve described above.

Post to Twitter

Posted by Andrew, filed under AIR, C++, Degrafa, Flex, WCAP. Date: October 5, 2008, 8:16 pm | 4 Comments »

4 Responses

  1. Andrew Westberg - The Implementer | Our Start Up Story Says:

    [...] Since starting Swift Mako software, I’ve consulted on a number of Simplified Logic projects as well as new development for Westberg Consulting on a project called WCAP. [...]

  2. » Blog Archive » AIR Update Framework inspirations Says:

    [...] enhancement, however was inspired by the AIR Update Framework.  My new AIR-based software WCAP uses the framework to keep my users up-to-date with all the latest patches, fixes, and [...]

  3. » Blog Archive » Running AIR 1.5 Apps on 64-bit Gentoo Linux Says:

    [...] I downloaded WCAP Pro and unzipped it to [...]

  4. Eko Says:

    it is so cool

    ?????? ??

Leave a Comment

Your comment

You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.